The Ashton Model Transport Vibration Test Bench, also known as the analog road transport shaker, has a very wide range of functions. The history of this equipment was developed during the Second World War. Many people suffered from setbacks in transportation and the guns were transported to the site. Found on the battlefield can not be used, and this is the most wrong thing. So smart people think of simulating transport vibrations in advance. If the product is not damaged in the simulation space, then it is certainly not a problem to really transport it to the battlefield. Of course, there are certainly many stories in the middle, just because the relationship between time is not much to say here. Today, Ai Si Xiao Xiaobian explains to you the operating procedures and post-maintenance of the analog transport vibration test stand produced by Ai Sirong .
Precautions and maintenance:
1. It should be installed at a distance of more than 60cm from the adjacent wall or other machine.
2. It should be installed in a place with little dust and good ventilation.
3. Check the power supply and grounding cables. Check that the power cables are properly wired according to the specifications and that they are properly grounded.
4. Adjust the clamped specimen, balance the specimen in the adjusted guardrail device, and fix the clamped test specimen. The clamping force should be appropriate. The clamping force should be appropriate. The clamping force should be appropriate. The clamping force should be appropriate to avoid clamping. Injury is tested so as not to pinch the tested sample so as not to pinch the tested sample to avoid being pinched.
Care instructions:
1. After each use of the equipment, clean the inside and outside of the equipment.
2. The coating layer of the equipment should always pay attention to anti-corrosion measures to prevent corrosion, use anti-rust paint oil on the outer surface of the equipment.
3. For long-term use of this tester, regular periodical should regularly and regularly. Regularly add lubricant to the rotating part of the machine. Add lubricant to the rotating part of the machine. Lubricate the rotating part of the machine by adding lubricating oil to the rotating part of the machine.
4. The motor must be inspected and cleaned regularly. Dust cannot accumulate on the motor housing to affect the normal operation of the motor. If the motor is in operation, if there is special sound or surface temperature abnormality (temperature greater than 70°C), the machine should be shut down immediately for inspection. If it is damaged, it should be replaced in time. If the motor seat fastener is loosened and the displacement occurs, it should be reset. If the lubricant is missing, it can be lubricated with calcium-sodium-based grease.
5. Do not disassemble and disassemble the zero (part) parts of the electrical components and equipments at will, so as to avoid the bad electrical control circuit, which will cause human failure and affect the performance of the equipment.
6. There are no flammable, explosive and corrosive substances around the equipment when it is stored.
In accordance with the above method, you do not have to worry about the use and maintenance issues after you purchase the analog transport vibration test rig. All you need to do is to solve all technical problems for you. Welcome to consult or login URL:
Basalt is a volcanic stone that has been used in architecture for centuries. Although basalts boast the durability of a granite, they tend to have the consistent coloration, markings and subtlety of a limestone. Since the material is neutral in color and doesn`t etch when exposed to acidic foods, basalt is a popular kitchen countertop material.
If you want premium quality stone coupled with the experience and technological ability to produce your specific project, please feel free to contact us!
Basalt Stone Tiles,Beauty Basalt Stone Tiles,Sturdy Basalt Stone Tiles,Economical Basalt Stone Tiles
Guangzhou Jade River Enterprises Co.,Ltd. , https://www.gzjaderiver.com