The simple wardrobe is small and the unit is firm and easy to assemble.

[ Chinese wardrobe net ] For small units, the simple wardrobe can save a lot of space for it, but don't choose the wardrobe because it is a simple wardrobe. A good simple wardrobe can be the keynote for a bedroom or even a whole family.

Simple wardrobe classification

The simple wardrobe is divided according to the skeleton material: a wooden simple wardrobe and a steel frame simple wardrobe.

Simple wardrobe

Simple wardrobe classification

1. Simple wooden wardrobe: ordinary wooden simple wardrobe frame is made of fir, fir is relatively cheap, but it is easy to deform after a long time, the service life is often more dependent on the manufacturer's work, whether there is drying process, how to deal with the interface , the quality of the screw fittings. In terms of maintenance, wooden wardrobes must be kept waterproof. The cabinets are prone to decay when exposed to water. It is easy for insects to stay in and easy to wet.

2, iron frame simple wardrobe: related to the wooden simple IKEA wardrobe, steel pipe products are more resistant to corrosion, not wet, after rust-proof disposal, will not rust. The bearing capacity is also better. At the same time, the simple wardrobe of the iron pipe on the device is usually made of ABS plastic foot cover, which is relatively easy to install.

Simple wardrobe purchase

Simple wardrobe purchase

Simple wardrobe purchase

1. See if the simple wardrobe is easy to assemble: The most obvious feature of the cloth wardrobe is that it is easy to disassemble and install. Therefore, when selecting a simple wardrobe, we should first understand the installation method and illustrations. Generally speaking, the design is reasonable. The simple wardrobe can be completed by hand without any complicated tools, and the installation process generally takes no more than half an hour;

2, see if the simple wardrobe is stable: the stability of the wardrobe structure is very important, after all, the main use of the wardrobe is to hang clothes and put clothes. The stability of the wardrobe mainly depends on the thickness and weight of the steel pipe. The heavier the steel pipe, the heaviness and durability will be higher. In addition, the steel pipe interface material should be paid attention to. The better steel pipe interface is made of high quality ABS material. Compared with the inferior ordinary plastic interface, the force is better and the durability is stronger;

3, look at the design of the simple wardrobe is reasonable: cloth wardrobe is relatively simple design, but the wardrobe should have at least two- or three-layer design, generally designed for the left and right structure and the upper and lower structure, one of the design space is small It is mainly used to place foldable clothes or folded quilts, while the other layer is generally larger, with steel pipe hangers, which can be used to hang jackets, shirts, etc. and fold clothes. This design is beneficial. Place a variety of clothes;

4, look at the degree of sealing of the simple wardrobe : the sealing performance of the simple wardrobe is also an important factor to measure the quality of the wardrobe, if the wardrobe is not good, it is very easy to enter the dust, even in the spring is also prone to wet, it will lose The protection function of the wardrobe is that the high-quality cloth wardrobe on the market generally uses a sealed zipper design, and there is a spacer cloth underneath to prevent dust from entering and ensure that the clothes are clean and hygienic.

Burner & brass Valve

A Gas Burner is a device that produces a controlled flame by mixing a fuel gas such as acetylene, natural gas, or propane with an oxidizer such as the ambient air or supplied oxygen, and allowing for ignition and combustion.The flame is generally used for the heat, infrared radiation, or visible light it produces. Some burners, such as gas flares, dispose of unwanted or uncontainable flammable gases. Some burners are operated to produce carbon black.In domestic and commercial settings gas burners are commonly used in gas stoves and cooktops. Our burners can be matched with either Zinc Valve or copper valve, with high matching degree of conventional size and wide application.

Brass Ball Valve,Gas Burner Valve,Gas Cooker Head,Gas Cooker Spare Parts

Ningbo SaiOu Cookware Co., Ltd. , https://www.nbsaioucookware.com