Ariston electric water heater installation steps are there Ali

Among the domestic water heater brands, Ariston is a well-known one. The water heaters selected by many people in the home are also the brand. What are the installation steps of Ariston electric water heaters? Many people in the process of using water heaters are worried that some will happen. What are the precautions for Ariston electric water heaters?

First, Ariston electric water heater installation steps

1. When installing the water heater, the first thing we need to do is to first use the impact drill to punch the fixed installation hook on the load-bearing wall. The distance between the hooks is determined according to the spacing of the Ariston electric water heater rack, and the water heater can be directly hung up. .

2. Make sure there is a socket next to the water heater and ensure power supply.

3. The next thing we have to do is to connect the water inlet and outlet pipes of the water heater to the reserved pipes at home.

4, then install the shower head

5, open the shower and water into the tank to fill the water, until the shower stabilizes the water is also what we need to do.

6, the last step is to plug in the power plug to test whether the machine can work properly.

Second, Ariston electric water heater notes

1. Location selection. Water heaters are generally installed in the bathroom in the home, and many water heaters are installed in a wall-mounted manner, which requires attention. For wall-mounted water heaters, it should be considered whether it is conducive to maintenance and repair after installation, and it is more safe to use after the protection work day in advance. In addition, avoid places where gas leakage is likely to occur. Do not choose a place where strong electric power and strong magnetic field directly act, and choose a position that is relatively stable and does not cause large vibration.

2. Install the position of the safety valve pressure relief drain below the water heater body, that is, keep the safety valve at a downward angle. The reason here is that the water heater needs to generate water when the water leaks in the water heater or when the safety valve is released in a certain period of time. At this time, it is necessary to ensure that the water can be drained smoothly and the installation device cannot be damaged. It is necessary to keep the angle of the safety valve always facing down. While the safety valve is facing down, there should also be a drain or floor drain below it, so be careful when installing the water heater.

3, people will inevitably splash water when bathing, although this water will not be very large, but if you are exposed to the power supply, it is prone to electric shock accidents, causing unnecessary accidents. Therefore, the power supply around the water heater or the power supply of the water heater must be protected by a power supply. The plastic cover can be added or the plastic socket can be used to protect the power socket.

What are the installation steps for Ariston electric water heaters? The installation work for Ariston electric water heaters should be handed over to professional people. If it is done by yourself, it is definitely easy to install. There are many precautions for Ariston electric water heaters, especially when using water heaters in winter, you must pay attention to indoor air emissions.