Bedding device for soft mattress packaging machine

Patent Name Soft mattress packer's push package device Patent applicant Li Dezhao Principal Applicant Address 528244 Lishui Town, Nanhai District, Foshan City, Guangdong Province, China Lianyuanyuan Industrial Park Yuantian Bedding Machinery Co., Ltd. Inventor Li Dezhao Application (Patent) No. 200420095578.1 Application Date 2004.11.24 Certification date Approval Notice No. 2749802 Auditing announcement date 2006.01.04 Instruction CD-ROM number D0601-2 Main classification number B65B63/02 (2006.01) I Classification number B65B63/02 (2006.01) I Division Original application number Priority The push-pull device of the abstract soft mattress packaging machine is provided with a frame (11), and the two ends of the horizontal roll-pressing roller (2) in the upper part of the frame are supported on the frame through a bearing seat and a bearing. : Three parallel screws (7, 8, 3) are arranged in the frame around the crimping roller (2) in a circumferential triangle arrangement. Both ends of the three screws are respectively supported by the bearing seats (12, 21) and bearings. The rear support plate (9) and the front support plate (4) of the frame are synchronously driven and connected with the transmission mechanism, and the vertical push package plate (1) is sleeved on the outside of the crimping roller (2) with a dynamic fit. They are respectively connected with three screw threads. The utility model can use mechanical power to roll the soft mattress rolled on the roller to roll down the roller, and the operation efficiency is high and the labor is saved. Sovereign item 1, the pushing device of the soft mattress packaging machine is provided with a frame (11), and both horizontal compression roller (2) located above the frame are supported on the frame through the bearing seat and the bearing. The utility model is characterized in that: three parallel screws (7, 8, 3) are arranged in the frame in a circumferentially triangular arrangement around the rolling roller (2); both ends of the three screws pass through the bearing seats (12, 21) respectively; The bearing is supported on the rear support plate (9) and the front support plate (4) of the machine frame and is synchronously driven and connected with the transmission mechanism. The vertical push-pull plate (1) is sleeved on the roll pressure through the center opening of the support plate. Outside the roller (2), they are respectively screwed to three screws.