The printing department of the printing company is the core technical department of printing. Now, CTP has dominated the printing process, while environmental protection and green printing production have become an international and industry development trend. The printing industry has spared no effort as a traditional industry. In the process, the prepress department also needs to support in many aspects. The pre-press CTP department needs to use a variety of materials, a variety of computers and machinery and equipment, if you can start from these aspects to save energy, the effect will certainly be obvious.
1. Multi-functional CTP plate wrapping paper.
2. Turn off or put the computer to sleep after work.
3. In the non-working state, the adjustable CTP version of the room ambient temperature is 2 °C.
4. Appropriate adjustment of CTP related equipment can save energy for you.
5. Install a water saving valve or use the circulation function to save water.
6. Properly adjust the amount of light entering the window and use less light source to bring good results to your health and energy saving.
7. Transform your printing device and save you a lot of money to purchase compatible inkjet cartridges.
8. Incomplete plates can be used as small size plates after cutting.
9. Can directly extract the "silver" film fixer.
10. Learn more advanced technologies and reduce the error rate.
The above ten hexagrams are just some small methods in the pre-press production process, but small methods can really save energy in the long run. Of course, there may be more and better ways to ensure quality and reduce costs in the prepress department. As long as everyone can do it with care, it will bring benefits to themselves and environmental printing.
The above content is selected from the first issue of 2010, Printing and Printing , Packaging and Decoration , and more journal content. Please pay attention to the journal channel .
Coil Straightener Feeder with compact design are preferred to be used in case of only small available space as well as in case of less delicate coil material with big material square. They normally are used at middle-sized feeding lengths and middle-sized number of press strokes per minute.
Coil Straightener Feederare composed of a Decoiler Straightener unit and NC Servo Feeder unit and are particular suitable for profiling, Metal stamping press line, roll forming line, laser cutting, shear and many other machining processes.
By combination of straightener and roll feed into one machine, so called feeder-straightener, which is positioned directly at the press, the needed space for a (very often long) material loop of straightened material can be saved..
The feeder-straightener is supplied with material out of a (in comparison) very small loop of not straightened material below the Decoiler.
Coil Straightener Feeder is suitable for automotive industry, automobile stamping, appliances manufacturing, computer and electronic components, hardware and metal parts/Metal Fabrication/Precision Metal Stamping industry etc industry. Such as Bracket, Damper, brake Pad, Tie Bar, Electric Accessory, Shell Parts Of Printers, Computer Frame,Slide Rail of Car Seat, Splash Shield of car body and etc.
Press Room Automation, Coil Straightener Feeder,NC Leveler Feeder, Unwinding Leveling Feeding
Mayflay Machinery(huizhou) Co.,LTD , https://www.pressfeeders.com