Six ways to do your own cosmetics

* The rattan or bamboo products will be fouled for a long time, and can be scrubbed with salt water to decontaminate and soften and tough.

After making tea on the tea table with the fireproof board, it will leave unsightly smudges on the tea table. For this, you can sprinkle some water on the tea table, wipe it with the tin foil in the cigarette box, and then scrub with water to wash off the tea traces. Scrubbing tea sets with this method also has the same effect.
The hot cup plate and the like are placed directly on the furniture lacquer surface, leaving a circle of white hot marks. Generally, just wipe it with kerosene, alcohol, toilet water or a damp cloth moistened with strong tea. Gently rub the iodine on the hot marks, or apply a layer of petroleum jelly, and wipe the hot marks with a rag every two days to eliminate.

* Cigarette butts, ash or unfinished matches, etc., sometimes leave scorch marks on the furniture lacquer. If only the paint surface is burning, apply a thin layer of hard cloth on the toothpick, gently wipe the traces, and then apply a layer of wax, which can be removed.
* The white tabletop and white chair in the home are easily soiled, and it is not easy to wipe off the dirty marks with a rag. Try rubbing the toothpaste on a clean rag and wiping the white furniture. The oil will be removed with a single rub. Because the abrasive powder contained in the toothpaste has a strong decontamination effect. However, be careful not to use too much force during operation, otherwise it will damage the paint film and be counterproductive.
* If the furniture is scratched and the wood is not touched, use a crayon or pigment that matches the color of the furniture, apply it on the wound surface of the furniture, cover the exposed base color, and then apply a thin layer of transparent nail polish. .
* When there is crack in the wooden furniture or floor, you can first cut the old newspaper, add a proper amount of alum, boil it into a paste with water or rice soup, then embed it into the crack with a knife and smooth it. It will be very strong in the future. After applying the same color of paint, the wood can be restored to its original appearance.

Fountain Pump

HENGYUE INDUSTRIAL CO.,LTD , https://www.hetoaquarium.com