[ Chinese wardrobe net ] If you choose to renovate the old wooden wardrobe , repaint or paste wallpaper, it is recommended to use self-painting graffiti may be better, the pattern can be downloaded online, you can choose color painting, you can also choose mold painting.
Use the old newspaper to cut out the pattern you like and stick it on the door. Spray the first door 15 to 25 cm from the door. Note that the paint film should be even, and then spray it twice. Then use a wet towel to wet the newspaper and repair the location of the burrs. If you are not satisfied with the two colors, you can buy another can of paint for color printing. The following small series focuses on the wardrobe painting process.
The first is the choice of wardrobe paint, the wardrobe paint mainly has a seal paint and open paint. The seal paint is divided into clear water paint and water spray paint. The water paint can directly see the original color of the log wardrobe. The water paint is rubbed on the surface of the log, and then painted, the surface has no particles; the open paint is The surface can show the whole solid wood texture effect, relatively rough, suitable for the European and rural style wardrobe; the surface of the water paint can not see the original wood grain because the surface is rubbed, from the reverse side can see the effect of the original wood grain.
Wardrobe painting steps:
(1) Sandpaper polishes the surface of the wood until it is free of stains and feels smooth and burr-free.
(2) Mix and mix the paint components in proportion, filter, and let stand for 15 minutes or more.
(3) Put on a mask, clean the surrounding environment, spray water on the ground to prevent floating dust. Brush the wool brush repeatedly with a comb until it is not lint. Mix the clear oil with 50% thinner (or use a closed primer directly), and brush one-fifth of the brush into the paint, and draw the paint on the plate evenly (striking). Do not miss the brush or thick brush.
(4) Fill the hole and make up the seam. After the primer is dry, fill the joint hole with putty and scrape the scraper.
(5) After drying, smooth with 600# sandpaper (slightly polished, can not grind the wood surface)
(6) Thoroughly clean, wipe off the surface with a dry cloth (do not use a damp cloth)
(7)? Apply primer: apply transparent primer (polishing primer), first horizontal stripes and vertical stripes, brush less lacquer, try to apply thick and even.
Open brushing (the final effect is uneven wood grain, suitable for nitro, water-based paint): (7) Steps up to 2 passes, after each pass, finely grind with 1500# sandpaper. Generally, it can be polished 2 hours after painting, and if the paint is sticky sandpaper, if the sandpaper is dry powder, it means it is dry and can be polished.
Closed brushing (final smooth paint film, suitable for polyester paint): (7) Step brush 2-4, after each pass with 600# sandpaper smoothing (with sanding plate).
Repeat step (6)
(8)?? Surface fine grinding
(9)?? Brushing finish
Brush 1/2 蘸 paint, evenly brushed, first horizontal stripes and then vertical stripes.
Open brushing: two paintings, after the first dry, use 1500# sandpaper to rub the individual particles in the paint film (partially polished)
Closed brushing: 2-4 passes, the first few are slightly finely ground with 1500# sandpaper. The last brushing speed is a little slower and try to keep it even.
After the last one, the window was closed and the air circulation was prohibited. The personnel left, and after 2 hours, the window was opened and the taste continued to dry.
hair mask
DELIN HAIR COSMETICS , https://www.hairstylingwaxfactory.com