[ Chinese wardrobe net ] How to calculate the size of the custom closet ? Customized wardrobe calculation area is an important consideration when selecting. Many people don't know how to calculate the area of ​​the custom closet. It is not clear where the difference between the two main calculation methods is. Let me tell you in detail below!
Customized wardrobe deployment area algorithm
This kind of calculation is the most common calculation method at present, that is, multiplying the total area of ​​all the plates of the wardrobe by the unit price is the total price of the plate. The advantage of this way is how much the plate costs, which is more transparent, and can determine how much the interior of the wardrobe is separated according to family habits. According to the expansion area calculation, pay attention to whether the backboard is charged and how to charge.
Example of expansion area calculation:
1, drawer pants rack 2: 2 * 70 = 140, Yitong 2 * 10 = 20
2, 18 thick board: 2*0.6*2.815+2*0.6*1.94+2*0.53*1.886+1*0.53*0.943+1*2.632*0.57=9.7
3, 18 thick and the same body of the cabinet: This is a different calculation method for different businesses, some count meters, some squares (this cost-effective point), I still put him into the 18-thick board to calculate the square: 1 * 0.084 *1.886+0.065*2+2*0.037*2.632=0.613
So, why do I say that if the sliver is the same as the square of the same material of the cabinet (note that different materials are definitely counted as meters), you see the 9.15 meter strip, which is only 0.613 square meters. The manufacturer is not worthwhile. Cut a lot, so the difference in quality is definitely the number of meters.
4, behind the thin board: 5.46 square
So, how do we calculate it, according to the projection of 268, how much is the expansion of this drawing, generally the thin plate is 60% of the price of the cabinet board. Assuming that the price is X, we first calculate the case where the projected area is to be sent to the drawer. :
1463.5-140-20=X(9.7+0.613)+X*0.6*5.46
Solve: X=96
In other words, under the design of this figure, assuming a projection of 268 and sending 2 pumping, the unfolding price is 18 thick wrench 96/square, and the back sheet is 58/square.
If the above projection does not send the drawer:
X=106, that is to say, if 2 drawers are not delivered, the wardrobe with a projected area of ​​268 yuan/square is approximately equal to the unfolded area of ​​106 yuan/square. I don't know if you are clear.
How to calculate the area of ​​the custom closet
There are generally two calculation methods for custom-made wardrobes on the market today. First, the calculation according to the projected area of ​​the wardrobe is the length and height of the entire wardrobe, and the projected area is multiplied by the unit price to obtain the total price of the wardrobe. The second is to calculate according to the expanded area. It is the surface that each cabinet sees must be calculated separately, and then the area of ​​these faces is added to give the overall area of ​​the cabinet. The unit price is multiplied by the sum of the expanded areas, which is the total cost of the wardrobe.
Calculate the total price of the wardrobe with the expanded area. The calculation method is more complicated. Each surface involved must be calculated. As far as a laminate in the closet is, the area must be calculated, and if two sheets are used on the same side, two The area of ​​the plates must be calculated separately; if calculated according to the projected area, the calculation method is much simpler.
Customized wardrobe projection area algorithm
Regardless of how the interior layout of the wardrobe is set, how many partitions, the area of ​​the wall of the wardrobe projection multiplied by the unit price is the total price of the board. The earliest wardrobe manufacturers and current decoration companies generally charge in this way, but most of them must stipulate that the depth of the wardrobe should not exceed a certain size. If the partition is too much or the depth exceeds, it is necessary to add money, and the standard is not very uniform.
According to the projected area calculation example: Assume that the cabinet is an 18-thick board, the back panel is 7 thick sheets, the drawer (or the pants rack is sent 2), and the projection is 268/square. The calculation is very simple, which is 1.94*2.815. *268=1463.5, of course, if the drawer and pants rack are not delivered, the two things are calculated by 70/piece, and the two are 140, which increases the cost by almost 10%.
The knife is a must for erver kitchen .And we have great quality awesome product.It is precision forged from single piece of high-carbon German stainless steel; laser-controlled and tested cutting edge.The utility knife is perfect for peeling and paring fruits and vegetables.The chopper is sharp for cutting the food. We have chopper,chef knife, bread knife, caving knife,boning knife,utility knife .
Kitchen Knife,Chef Knife,Kitchen Knife Set,Sharp Kitchen Knives
MEO DEMO CO., LTD. , https://www.meobbqtools.com