[ Chinese wardrobe net ] One of the most frequently used furniture in the bedroom is the wardrobe . Whether your home is a finished wardrobe or a custom closet, poor maintenance can be implicated in every corner of the cabinet, accumulating a lot of dust, causing mildew, insects and deformation. I want to keep the wardrobe in my home clean and fresh all the year round. Xiaobian is here to give you a trick!
First, say goodbye to mold
In the spring, the rain is continuous and the air humidity is very high. If the water vapor invades into the wooden wardrobe, it will cause various problems such as mold, deformation and mites. How can we prevent moisture and mildew? You can do the following steps:
1 Closing the wall close to the wall will cause the water vapor on the wall to seep into the closet, causing the wardrobe to be wet and moldy. So if you are using a finished wardrobe at home, you can move the wardrobe out about ten centimeters from the wall.
2 In addition to turning clothes on a sunny day, you can usually plan ahead and put a piece of soap in the closet and suitcase to eliminate the musty smell. It is also possible to put dry tea leaves into gauze bags and distribute them everywhere, not only to remove the musty smell, but also to give the clothes a burst of fragrance.
3 If it is a finished wardrobe, you can put moisture-proof paper on the wall behind the wardrobe and the back of the wardrobe to achieve a certain moisture-proof effect. If it is a whole wardrobe embedded in the wall, you need to wipe the wardrobe with a dry cloth often, or put on moisture-proof paper to prevent the cabinet from getting wet.
4 to make the wardrobe breathable, or use dehumidifier regularly, so as to avoid the cabinet and clothing from getting wet. Use less aromatic fragrances to deodorize the wardrobe, as they are likely to cause damage to the fabric.
Second, the wardrobe fight against insects
The spring weather is getting warmer and all kinds of insects are starting to move. Every year at the beginning of March, we are greeted with horror and insects are active. When finishing winter clothes, it is necessary to take precautionary measures to protect clothing: to prevent insects from eroding clothes and wardrobes, and to avoid the disadvantages of locust breeding in the bedroom.
1 Clothing is free of mildew and insects, clean is the primary condition, clothes must be cleaned before storage, and then use anti-mold and anti-caries agents such as camphor, can kill the eggs of the aphids. The usual practice is to hang the mildew and mothproofing agent about 10 cm above the clothes so that the active ingredients are fully effective.
2 For our own health, we can also refer to the ancients' practices and use natural methods to drive out pests. For example, put lavender or dried chili in a mesh bag and place it with the clothes. In addition, the clothes are stored in a sealed bag to make the pests inaccessible.
Third, various materials maintenance industry has specialization
In addition to the cabinet itself, the wardrobe also has sliding doors and hardware accessories. These parts are also more targeted because of different materials.
Leather sliding door
The leather of the leather sliding door will be cold and hard after resurgence, and there will be mildew on some non-ventilated surfaces, which will easily lead to deformation or fade of colored leather surface after damp.
Coping with the coup: After each dust removal, apply special oyster sauce, lanolin, leather oil, etc. to the surface. Wipe off the surface moisture with a soft dry cloth. The mildew can be removed with a mildew remover and then coated with leather maintenance oil. For the dermis, consider placing some desiccant to keep it dry.
Solid wood sheet
Today, many solid wood wardrobes have undergone a rigorous drying process before leaving the factory, but this does not mean that no moisture protection is required.
Coping with coup: solid wood wardrobe should be maintained with special cleaning agent. It can be evenly coated on the surface of the cabinet with protective wax or special cleaning agent, then wipe it gently; or use absorbent paper to protect the surface of the wardrobe from moisture; The edge of the wardrobe is not good or damp, which may cause the furniture board to expand and damage. Pay attention to waterproof when using it. Install a waterproof pad under the corner of the wardrobe that is easy to absorb water. Leave a ventilation distance near the wall of the outer wall and the bathroom.
Hardware
Moisture can cause rust in the metal, and the surface of the iron metal fades and spots appear.
Coupling: Hardware accessories should always be scrubbed with tarpaulin and mild detergent. Try not to use it in a humid environment, and pay attention to waterproof and moisture-proof. If it is wet, it is best to clean it with a dry rag. Metal parts can only be wiped gently with a dry soft cloth. Do not use chemical cleaner or acidic liquid. If it is found to have black spots on the surface, it can be wiped with a little kerosene.
At the same time, keep the track of the custom closet sliding door, if there are any debris, dust, etc. in the track door, please use the brush to clean the sliding door track. Strictly prevent heavy objects and sharp objects from hitting the closet track to prevent deformation inside the track and affect the sliding effect.
Stainless Steel Bottles are made from high-grade 18/8 stainless steel. This material is food grade, non-toxic, durable and easy to clean.
And we got a lot of different kinds of Stainless Steel Bottles. For example: Stainless Steel Cola Bottle, a classic design that is popular in the market and easy to use, also looks good. Speaking of looking, our Cola Bottle comes in changeable colors and diverse patterns.
Stainless Steel Cola Bottle,Stainless Steel Vacuum Cola Bottle,Stainless Steel Silk Printing Bottle,Stainless Steel Rubber Printing Bottle
Ningbo Auland International Co.,Ltd. , https://www.ecocolabottle.com