When using a mold incubator from Shanghai manufacturers, it's essential to follow these important guidelines to ensure safe and efficient operation:
1. Avoid inverting or laying the incubator flat at an angle exceeding 45 degrees during handling. This helps prevent damage to internal components and ensures proper functionality.
2. When the equipment is not in use, make sure the interior remains dry and always disconnect the power supply. This prevents moisture buildup and reduces the risk of electrical issues.
3. If lighting is not required inside the incubator, turn the light switch off. Leaving it on can affect temperature distribution and reduce the lifespan of the lamp.
4. Never touch or tamper with the temperature and humidity sensors. Disturbing them may lead to inaccurate readings and loss of control over environmental conditions.
5. Avoid frequently changing the set points during operation. Doing so can cause the compressor to cycle too often, leading to unnecessary wear and tear and reducing the equipment’s longevity.
6. The incubator is equipped with two sets of fuses. In case of a malfunction, first turn off the power, check the fuses for damage, and then proceed to inspect other components.
7. To maintain the appearance of the machine, do not use any corrosive cleaning agents. Instead, wipe the exterior with a dry cloth or isopropyl alcohol, and clean the interior regularly to keep it free from contamination.
8. Ensure the axial fan inside the incubator is operating correctly to maintain even temperature distribution. During experiments, avoid overcrowding the chamber and make sure the fan outlet is not blocked to allow proper air circulation.
9. If the equipment malfunctions, seek assistance from trained professionals or contact the manufacturer's service department. Do not attempt to disassemble or repair the unit yourself, as this may void the warranty or cause further damage.
By following these tips, you can maximize the performance and lifespan of your mold incubator while ensuring a safe and controlled environment for your experiments.
Bbq Grill,Gas Cast Iron Grill Grate,Kettle Grill,Grill Grates
JIANGMEN XINXIN METAL PRODUCTS CO., LTD. , https://www.bbqoutdoorgrill.com