At present, there are many streaming media service systems in the industry, but most of them require professionals to configure them, and generally only support one or two streaming media protocols at the same time, and can provide basic streaming media protocols such as rtmp, rtsp, hls, ts, etc. There are still not many streaming media servers used by multiple terminals. Today I will introduce a streaming media service system software that is more convenient than Wowza Media Server and supports more protocols, Aoku Media Server2.0 (AMS2.0 for short)
Aoku Media Server2.0 is a multi-threaded, cross-platform streaming media service system produced by Beijing Polarstar. It has a modular design and all have high-performance streaming media service systems developed by C ++ and C. It is installed and used. Very convenient, there is currently a trial version for users to test, download address http: //;
Today I will guide you through the appearance of AMS2.0. After obtaining the trial version from the above address, extract it to any partition of the hard disk. The IP address of this machine is 192.168.1.8. Figure:
If the system is Windows7 or above or Win2008 or above, please open the service manager as an administrator, and then click the "Install Service" button (if you install 360 or other firewalls and other security software, please click Run), it will be The AMS service is installed into the system service, click the "open" button, the AMS system will run normally, as shown below:
The system prompts that the rtmp service is normally started on port 1935, the management service is on port 1936 (port for internal management), the rtsp service is on port 554, and the built-in Apache Server is started. Information, you can check the rtmpserver.log file in the logs directory to see the system log, it may be the cause of the port conflict. In the "Service Configuration", there is a port detection function that can help you detect AMS. Whether the port is occupied. As shown below:
After the normal startup, a triangle icon will appear on the task bar in the lower right corner of the system. Right-click on the pop-up menu, select the login background, enter the user name admin, password admin, and you will log in to the ams background. The system has built two by default Live channels, live / live1 and live / live2, by default, only the rtmp protocol and rtsp protocol are enabled. Friends with hardware encoders, such as Aoku cool high-definition encoders (such as Aoku HT9001 or Aoku VE801 ), The encoder of Century Ding Dian, or any other high-definition encoder that supports the rtmp streaming protocol, you can set the encoder to push the stream to the local live / live1 or live / live2, if there is no encoding at hand You can also use Aodbe's software to encode the FME to capture the image of the camera and push the stream to the local machine. You can also modify the live / live1 attribute in the AMS background to pull mode, so that you can pull all the other servers' rtmp protocol to this Machine for testing.
The stream is normally pushed to live / live1 or live / live2, you can see live stream information in the background, as shown below:
Click on the website to jump to the front desk, you can go to the front desk to watch the live stream. The flash plugin is used to watch the live stream. As long as you have a flash plugin on your computer, you can access the ams host address to watch the live stream. As shown below:
Test rtsp can use vlc, open vlc, enter the stream address rtsp: //192.168.1.8/live/live2 to play.
To test TS multicast, you need to modify the properties of the live channel, open the TS stream, and enter the multicast address at the same time, as shown below:
Click OK, then return to the interface, click to open the TS stream, the RTMP stream that was pushed up will be multicasted at the address 234.5.6.7:9911 as a TS stream, and open udp: //@234.5.6.7 with VLC: 9911, you can watch the multicast.
To test HLS, first edit the channel, enable HLS, open HLS in the channel list, after normal opening, you can directly access http://192.168.1.8:81 through IPAD or IPHONE (note that entering port 81 here refers to the PC Watch the front and back ports) to watch the live broadcast.
If you want to record the relatively pushed stream, you only need to click "start recording" in the channel list to record. The default recording file location is in the live directory of the Data directory under the AMS directory, as shown below:
If you want to forward the pushed stream to other RTMP servers, click "Forward Stream" in the live broadcast list, enter the address to be forwarded in the interface that appears, you can forward multiple addresses at the same time. As shown below:
In short, using Aoku streaming software, you will find that streaming live, recording, on-demand, will become very simple, even without a technical background, you will learn how to use it in a short time, Aoku streaming software Provide API, which can be used by other software to call the internal interface, and can also provide WebService to connect with other CMS management systems. The above is a brief introduction to the usage of Aoku software. Aoku professional version of the streaming media service system provides virtual live broadcast, task recording, support for Andriod native player, supports set-top box playback, not only can be combined with your CMS system application, It can also be customized according to your requirements, support secondary development, and can even be embedded in your ARM system to provide more powerful functions for your system. If you have any questions during use, please contact Polaris.
Black Grid Transparent Tarpaulin
Transparent Tarpaulin,Clear Plastic Tarpaulin,Transparent Plastic Tarpaulin,Black Grid Transparent Tarpaulin
Henan Fengcheng Plastic Co.,ltd , https://www.fcsyplastic.com