Shanghai Bilang constant temperature water tank maintenance and maintenance program
How to maintain and maintain the constant temperature water tank? Everyone knows that after using the constant temperature water tank for several years, various problems generally occur, such as: the cooling speed becomes slower and the noise becomes larger. When these problems occur, many customers blame the seller. The editor believes that when the instrument has problems, it must be considered in many aspects. It is also related to your usual maintenance and maintenance. The following is about the maintenance and maintenance of the constant temperature water tank. Let's analyze:
1. As we all know, there are very few impurities in the water. Even if distilled water is added to the water tank, it is impossible to completely guarantee that there are no impurities at all. For the water cycle, the general temperature is set at 20 ℃, especially adapted to the growth and reproduction of microorganisms. After a long time, these microorganisms will block the filter of the waterway and cause the backwater to be poor, and the pump will have a loud noise. Sometimes these microorganisms are attached to the surface of the heat exchanger, causing the heat transfer effect of the heat exchanger to deteriorate and the cooling capacity to become smaller. Therefore, the daily maintenance work must be done in strict accordance with the requirements in the manual, the inner tank should be cleaned regularly, and the tank should be kept dry for a long time. There seems to be water leakage in the water circulation, and sometimes there will be a few drops on the ground. Is there a leak on the waterway? Generally speaking, during normal use, there will be no leakage on the waterway. When the relative humidity in the air is relatively high and the relative humidity in the air is too large, dew condensation is easy to condense at the water pump, water pipe joints, and external water pipes in the water circulation circuit. After accumulating, it will drip onto the ground. Leaking place. If you care about this, lowering the room temperature or dehumidifying can avoid dew.
2. The operation of constant temperature water tank water circulation is simple, but the regular maintenance work can not be ignored, the more simple and understandable things, the more attention should be paid. Many problems that seem to be faults are actually caused by the failure to regularly maintain the constant temperature water tank. The electrical power of the water cycle itself and the heat that the refrigerant takes away from the load need to be removed from the radiator at the front ventilation hood. If the front ventilation hood is full of dust and willow cotton, it will hinder the dissipation of these heats for a long time, and the cooling effect will be large If the reduction is not cleared, the instrument may burn out due to the inability of electric heat to radiate. Generally speaking, the reduction in cooling capacity under normal use conditions is caused by poor ventilation and heat dissipation or the ambient temperature is too high.
BILON brand, dedicated service
Changxing Mingwang Rubber & Plastic Technologies Co.,Ltd. , https://www.cxmingwang.com