[ Chinese wardrobe net ] The whole wardrobe door edge strip is a kind of protection strip used to wrap the perimeter of the wardrobe door. In order to avoid the collision of the corners of the door, it can play a role in the space decoration to a certain extent, because the door edge There are a lot of styles of the strips, and the effect of the decoration is still very good. So how to install the whole wardrobe door trim?
Overall wardrobe door product introduction
The door edge strip is a soft decorative line that wraps the wall, which is the beading, the card strip, and the like of the door sleeve. The main production materials are plastic steel, polymer, wood plastic, MDF, logs, gypsum, magnesium alloy, marble and so on. The widely used steel door and wood plastic door edge strips, the surface processing is divided into film and transfer and baking paint and other methods. The shortage of the transfer door edge strip is that the color chromatic aberration obviously affects the appearance and the uneven coloring tends to be more ç‘•ç–µ, the paint lacquer door edge is beautiful and delicate, but the price is relatively high, and the paint material is environmentally friendly, and the coloring is easy to fall off and is not resistant to flooding. .
Overall wardrobe door trim installation method
Overall wardrobe door trim installation - preparation
Put the assembled door edge strip into the door hole, the back side of the door edge strip is on the same parallel plane as the door opening, and the wooden wedge is fixed downward from the left and right of the door hole, and the verticality of the door edge strip is checked by a hanging hammer. The verticality deviation is <1mm, the two diagonal errors are <3mm, and the horizontalness of the horizontal plate is checked with a level to make the horizontal dimension <1mm. After the horizontality and verticality meet the required requirements, the "L" shape is obtained. The position of the round hole on the other corner of the connecting piece corresponds to the surface of the wall, draw a mark with a pencil, and all the positions of the connecting parts are marked accordingly, and the side edge strip is removed and placed with a hammer. Drill holes on the wall where the mark is just recorded. The hole diameter is ∮8 to ∮10mm, and the hole depth is 50 to 60mm. When drilling, the impact drill bit drills slightly to the inside of the wall, which can reduce the cracking of the edge of the wall.
Overall wardrobe door trim installation - punching installation
After all the holes have been punched, use a slightly smaller than the hole diameter to penetrate into the hole to fill the hole; then put the removed door edge into the hole to adjust the horizontality and verticality, and cut it with wood. Slightly fix the door strip so that it does not shake, and then use a 30mm self-tapping screw on the other side of the "L"-shaped iron piece to fix it with the wood on the wall (the screw must be tightened with a screwdriver or a speed drill). You can't use the woodworking hoe to directly knock in. If the gap between the door edge and the wall is large, you should first nail a strip of wood around the sides of the hole. The middle part of the hole is filled with styrofoam on the fixed door edge. Finally, Embed the soundproof bumper strip in the specified position on the door strip.
Dog Toy For Large Dog,Dog Toys For Big Dogs,Tough Toys For Big Dogs,Large Dog Chew Toys
Shaoxing City Heou Leisure Goods Co., Ltd. , https://www.heoupettoy.cn