[ Chinese wardrobe net ] 1, composite solid wood, moisture-proof board, solid wood paint-free board: both moisture-proof, environmentally friendly, and cost-effective. The national cabinet products have experienced more than ten years of development, and more than ten years of experience can be enough to determine the use of moisture-proof panels in the cloakroom is the best choice! The moisture barrier of the cabinet can be used in heavy humid environments, showing its high quality. Due to the more fragile surface, the requirements for production equipment are higher. Nowadays, the new wall is decorated and painted, and the wall will have a small amount of water. After the whole cloakroom is installed, it cannot be ventilated, and the back part of the wardrobe needs a plate with better moisture resistance. The moisture-proof board is immersed in water. Because of the long wood fiber and the green moisture-proof agent, the immersion expansion will not expand until it is soaked to a certain extent. Therefore, the moisture-proof board of most brand cabinets is the main material of the cabinet, which is reasonable.
2. Regular manufacturers produce particleboard and MDF: Particleboard produced by the same material is more environmentally friendly than MDF. In fact, the reason is simple: molding wood, no glue, environmental protection is definitely nothing to say. If the amount of glue used to cut into 1 piece and 5 pieces is different, the less glue is, the more environmentally friendly it is. MDF is also called MDF. It is pressed by wood powder and has better flatness. It is more suitable for boring and milling. It is usually used to make door panels, such as baking varnish and moulding (blistering). There is also a softer material for MDF, which is less prone to blasting when sealing, and easier to process, so many small factories use medium denier. In terms of moisture resistance, the particle board is much less resistant to moisture than the moisture-proof board, and the green core moisture-proofing agent is less. If it is in a humid environment for a long time, the wood is prone to mold and decay. The raw material of the MDF is wood flour. The MDF is soaked in water and will swell like a cake.
3, ecological board: (refers to the ecological board produced by small workshops) large core board or sandwich board plus double-sided paste triammonium surface! Quality: Sandwich panels (commonly known as blockboard, wood board) are plywood with solid wood core. It cuts logs into strips, splices into cores, and is made of outer surface materials. The force of the whole board comes from thin. The two-layer outer veneer is spliced ​​with wooden blocks in the middle, and the substrate is basically free from force and is easily broken and deformed. Most of the plates are made of fir for one or two years. As long as the pieces are broken with fingers, the nail holding power is several times lower than the national standard.
4, small factory low-cost production of particle board: most small manufacturers consider the cost, generally using particle board (that is, solid wood particle board), the use of ordinary glue, the lowest cost among the three materials.
Environmental protection: The advantage of the ecological board is that the substrate looks good. It feels like wooden blocks. The name of the ecological board is also very good. It also has the feeling of environmental protection. Everyone knows that the environmental protection standard of the board is mainly glue, and the environmentally friendly E0. The cost of E1 glue is very high. The small-scale factory will never use this kind of environmentally-friendly glue, all of which use industrial glue, and the cost is relatively low. Almost all large-scale brands in the national furniture market will not use ecological boards or fir boards. Before 2005, almost all the new homes were decorated with sandwich panels, almost all of which exceeded the standard. Since the rise of the large wardrobe brand, the use of moisture-proof panels and MDF, it is rare to hear environmental standards.
Peripheral Devices and Consumables
Based on the low labor cost and reasonable stainless steel cost, Helper help to offer clients internal transport devices with best price. These machines and device include standard material truck, smoking trolley, lifter, conveyer belts, spiral feeding machine, hydraulic lifter etc. The internal transport device is used in filling and forming workshop, tumbling and seasoning workshop, smoking and cooking room etc.
Helper has a professional team to design and produce sausage clips. They have rich experience and understand all the key points for produce good quality clips. From the raw material purchasing to mould designing, from the QC in production to post-treatment, they pay attention to all these details that lead to the good quality of Helper`s clip series. Our clips products include U shape clips, Great wall shape clips, and aluminum wire (for aluminum wire clipper).
U Shape Sausage Clip,Clips On Strip,Bag Packaging Clips,Screw Material Conveyor
Helper Machinery Group Co., Ltd. , https://www.helperfoodmachiney.com