[China] leather upholstered net wardrobe closet door elegant luxury, highlighting the rich and elegant, soft surface, making the room more warm and romantic, soft package good sound-absorbing effect, give the room a quiet environment. Nowadays, many families will consider the leather sliding door when choosing the sliding wardrobe. Here is a brief introduction to the production process of the leather sliding door of the wardrobe.
The method of making leather sliding doors is now mainly divided into two types.
One is to sandwich the leather in the middle of the glass, and fix it on the edge of the two layers of glass with a transparent tape, and then put it into the aluminum frame. This makes the construction simple, and also improves the grade of the sliding door and increases the added value of the product. Another is to glue the leather to the glass or MDF. Glass is the first choice. It is easy to take and cut, and it will not be deformed. The selection of the best high-density board is also a deformation. If it is fixed with a thicker and thicker aluminum profile, the cost of the sliding door will be much higher, and the large frame material is not refined.
There are also two ways to paste leather sliding doors.
If the leather is glued to the MDF, good white latex can be used, the cost is low, the adhesion is good, but the drying is slow, and the heating equipment can shorten the drying time of the white latex. However, white latex cannot be used for bonding between leather and glass because there is no adhesion. All kinds of adhesives are widely used everywhere, and a small number of people use glue. These two kinds of glues are suitable for the bonding of the board and the board, and the use of the leather and the glass paste can only be made.
First of all, when glue is applied, it is necessary to brush the glue to both sides of the material to be bonded, and then bond it to be the strongest after drying. The universal glue is thicker and can be brushed on the plate or glass. It is difficult to brush on the reverse side of the leather. Most of the glue is not available for purchase. The glue is thinner, and it can't be brushed back and forth. It will be granules, preferably sprayed with a spray gun.
The second thing to note is that these glues can easily contaminate the front, hand, site and other materials of the leather, which is time-consuming and labor-intensive. These two kinds of glues are not used for long-lasting adhesion on glass and melamine plates. According to the difference in glue quality, there are different degrees of degumming in three months to a year. The user needs to carry out maintenance.
Outdoor aluminum furniture is suit for outdoor patio usage for a long time. The material is 1.2mm , 1.5mm or 2.0mm thickness aluminum frame with powder-coated.
Secure and comfortable structure, simple design but elegance, is popular option for customer. Aluminum frame is welded and polished in meticulous style. Gently angled backs and wide arms encourage restful lounging. The industry`s best high-performing fabrics encase the thick, double-wrapped foam cushions.
· Traditional forms with a spacious, inviting scale
· Rust-resistant powder-coated aluminum frame.
· Comfortable 30 density cushion foam.
· Secure tempered glass for dining table and coffee table.
· Waterproof fabric for cushions.
Outdoor aluminum furniture with high quality and long time guaranty.
If you have any questions, please contact with us directly. Outdoor Aluminum Furniture are produced by Golden Eagle Outdoor Furniture Co.,ltd with High Quality and Good Appearance. Welcome you to visit our Factory for any inquiry, please send mail directly to us.
Aluminium Garden Furniture,Lawn Aluminium Garden Furniture,Outdoor Aluminium Garden Furniturel,Garden Aluminium Garden Furniture
Golden Eagle Outdoor Furniture Co., LTD. , https://www.gegardenfurniture.com