Recently, the first domestic AZJ901050FM nine-color gravure printing machine developed by Shaanxi Printing Machinery Co., Ltd. was successfully tested in one trial and has now been delivered to Qingdao Yiqing Printing & Packaging Co., Ltd.
This machine is a high-performance product based on the introduction of a full set of technical data from Fuxi Machinery in Japan. Discharging, discharging traction, receiving traction, and receiving four tensions are all controlled by the AC vector motor or DC motor with high control accuracy. After the tension swinging roller is detected, the closed loop control is adopted; Automatic refueling at any speed, the main drive adopts all gears enclosed in the gear box for immersion oil lubrication; automatic edge control device, vertical and horizontal automatic register device. In addition, it also has an automatic temperature control hot air drying system, an ink supply system that can automatically detect the ink performance, a still image system that directly prints the effect at a high speed, and the like. Due to the high-performance mechanical devices and precision control system and complete configuration, the machine speed of this grade can reach 200m/min, and the printing adaptability is wide.
Its main features are:
1. There is research and development based on the introduction of a full set of technical data from Japan Fuji. Its mechanical performance, control level, and configuration of peripheral equipment have reached the international level in the mid-1990s, and are equivalent to the similar models of Fujitsu in Japan. They are the highest level in the country and are unique at present.
2, automatically switch the material at any speed. In this process, a pre-drive device for the raw material roll was used to ensure consistent line speed during refueling. A paste surface inspection device was designed to ensure the reliability of the exchange and reduce the scrap rate.
The machine is designed with four cutting knives, two fore and aft, with upper knife and lower knife, which can be configured according to the needs of users.
3. Pre-printing devices for printing materials are designed before printing and equipped with cold-actuated devices to ensure the quality of printed products.
4. The printing device adopts a non-shaft pneumatic cone top device and is equipped with the same internal structure of the internal gear box as the international advanced machine. The gears are made of special materials and are lubricated and lubricated to ensure full performance of the high speed machine.
5. The ink supply system adopts an internationally advanced indirect ink supply structure to avoid the phenomenon of high-speed machine throwing ink.
6. The secondary air return drying system saves energy and is equipped with a dry box with advanced structure from abroad.
7. All four tensions are detected by pneumatic swing roller, controlled by high-precision cross-roll vector motor, and can be set intelligently.
8. Non-shaft pneumatic cone top is used for discharging and receiving, which is easy to operate.
9. The transmission shaft adopts foreign advanced structural materials, light weight (about 1kg), large transmission torque, which is one of the conditions necessary for high speed.
10. There are horizontal and vertical automatic register structures in the overall design of the aircraft, which can be selected by the user.
11, the machine has automatic edge control device, automatic layout system, still picture system, ink viscosity detection system and other advanced configuration for users to choose.
This machine is a high-performance product based on the introduction of a full set of technical data from Fuxi Machinery in Japan. Discharging, discharging traction, receiving traction, and receiving four tensions are all controlled by the AC vector motor or DC motor with high control accuracy. After the tension swinging roller is detected, the closed loop control is adopted; Automatic refueling at any speed, the main drive adopts all gears enclosed in the gear box for immersion oil lubrication; automatic edge control device, vertical and horizontal automatic register device. In addition, it also has an automatic temperature control hot air drying system, an ink supply system that can automatically detect the ink performance, a still image system that directly prints the effect at a high speed, and the like. Due to the high-performance mechanical devices and precision control system and complete configuration, the machine speed of this grade can reach 200m/min, and the printing adaptability is wide.
Its main features are:
1. There is research and development based on the introduction of a full set of technical data from Japan Fuji. Its mechanical performance, control level, and configuration of peripheral equipment have reached the international level in the mid-1990s, and are equivalent to the similar models of Fujitsu in Japan. They are the highest level in the country and are unique at present.
2, automatically switch the material at any speed. In this process, a pre-drive device for the raw material roll was used to ensure consistent line speed during refueling. A paste surface inspection device was designed to ensure the reliability of the exchange and reduce the scrap rate.
The machine is designed with four cutting knives, two fore and aft, with upper knife and lower knife, which can be configured according to the needs of users.
3. Pre-printing devices for printing materials are designed before printing and equipped with cold-actuated devices to ensure the quality of printed products.
4. The printing device adopts a non-shaft pneumatic cone top device and is equipped with the same internal structure of the internal gear box as the international advanced machine. The gears are made of special materials and are lubricated and lubricated to ensure full performance of the high speed machine.
5. The ink supply system adopts an internationally advanced indirect ink supply structure to avoid the phenomenon of high-speed machine throwing ink.
6. The secondary air return drying system saves energy and is equipped with a dry box with advanced structure from abroad.
7. All four tensions are detected by pneumatic swing roller, controlled by high-precision cross-roll vector motor, and can be set intelligently.
8. Non-shaft pneumatic cone top is used for discharging and receiving, which is easy to operate.
9. The transmission shaft adopts foreign advanced structural materials, light weight (about 1kg), large transmission torque, which is one of the conditions necessary for high speed.
10. There are horizontal and vertical automatic register structures in the overall design of the aircraft, which can be selected by the user.
11, the machine has automatic edge control device, automatic layout system, still picture system, ink viscosity detection system and other advanced configuration for users to choose.
Body Trap,Small Animal Body Trap,Raccoon Spring Traps,Metal Wire Traps
Hebei Liebang Metal Products Co.,Ltd , https://www.lbtraps.com