Maintenance and repair of electronic balance

Service Routine maintenance performed by Sartorius technical personnel on the balance will extend the service life of the balance and ensure long-term stable measurement accuracy. Sartorius can provide you with a maintenance contract with a period of 1 month to 2 years. The best maintenance contract depends on the location of the safe place and the specific accuracy requirements.

Repairs and repairs must be performed by trained service technicians. Untrained personnel attempting to repair may cause danger to users.

Cleaning

Unplug the power transformer from the socket. If there is an interface cable connected to the balance port, unplug the cable. Wipe the balance with a cloth soaked in mild detergent (soap). After cleaning, dry the balance with a soft dry cloth.

Take out the weighing pan and clean it:

Pick up the weighing pan and the weighing pan support and confirm that the weighing system is not damaged. Do not allow liquids to enter the balance housing. Do not use corrosive cleaning agents (solvents, etc.).

Clean stainless steel surface:
All stainless steel parts need to be cleaned frequently, take out the stainless steel weighing pan for thorough cleaning, and clean the stainless steel parts in the balance with a damp cloth or sponge. Only use household cleaners suitable for cleaning stainless steel products. Wipe the surface of the stainless steel clean, and then wash it thoroughly to confirm that all residues have been removed. Allow the balance to dry. If necessary, oil can be added to the cleaned stainless steel surface as additional protection. The solvent can only be used on stainless steel parts.

If there are signs in the safety inspection, the safe operation of the balance connected with the power transformer is not guaranteed

Turn off the power immediately and disconnect the device from the power transformer. Lock the balance in a safe place to ensure that it will not be used temporarily. Notify Sartorius maintenance personnel. Repair and maintenance work can only be performed by technical service personnel authorized by Sartorius

Acrylic chair is a contemporary seat for use in trade shows, restaurants, cafes, pubs, and modern cafes. It seems to float in space, looking elegant at any angle.  It is the perfect addition to any table to add that extra flair of modish style. All of our Acrylic Chairs come in variety of colors for the cushions to personalize your look.

Acrylic Chairs

Acrylic Chairs,Acrylic Dining Chairs ,Acrylic Desk Chair ,Acrylic Bar Stool

Shenzhen Apex Artcrafts Co,.LTD , https://www.apexdisplaycn.com