In the product installation and ultimately, bathroom hardware installation, do not underestimate the hardware, the installation is still flawed. Hardware ware generally has the following types:
1, basin: can be divided into hanging, column type, desktop three.
2, toilet: can be divided into two types of flush type and siphon type.
3, bathtub: one of the high-end bathroom equipment.
4, shower room: consists of door panels and floor basins.
5, bidet: women professional, the current domestic home use is less.
6, urinal: men's special.
7, hardware accessories: form patterns are different.
Hardware ware installation order
Wall tiles - suspended ceilings - paved tiles - installation of stools, washbasins, tubs - installation of connection drains - installation of lamps, sockets, mirrors - installation of towel bar and other hardware accessories.
1, toilet installation order
Inspecting the ground spout pipe - Aligning the spout - Flattening the alignment - Stamping - Drilling hole - Plastering - Putting on the rubber pad - Screwing on the nut - Two side holes in the back of the tank Draw Stamp - Punch - Insert Bolt--Double-reinforced water tank-hanging flat-looking--Tighten the nuts--Install the back-water tank under-water elbow--Install the eight-word door--Insert the drift door and the eight-word door--tighten the nuts.
2, washbasin installation order
Expansion Bolt Insert - Peeling - Pedestal Hanging - Place the washbasin on the shelf to find a flat surface - Sewer Connection: Washbasin - Straighten - Sheung Shui Connection.
3, bath installation
Sequential launch installation - putty tightly closed - Sheung Shui installation - try to correct.
Hardware ware installation skills
1, handle installation:
Handle installation should be ergonomic and easy to use. All handles in the same wardrobe must be neat and consistent when installing. The length of all screws should match the thickness of the cabinet door and drawer surface. When drilling with a power drill, the hole size should be the same as the screw diameter.
2. Installation of door hinges:
Generally, two hinges with a length of 100 mm are installed on the door of the room. If it is a solid door or a bumpy door, three hinges must be used, or two hinges with a length of 125 mm must be installed.
3, the lock installation:
After the door lock is installed, its handle should be between 900-1000mm away from the ground. When installing, firstly lock the lock body and lock tongue so that the tongue plate is flush with the door edge, close the door, fix the position of the lock plate, install the lock plate, and ensure that the lock plate is flush with the edge of the door sleeve.
<\p><\div>
Skin Scrubber,Ultrasound Skin Scrubber,Skin Care Machine,Stainless Steel Scrubber
Shenzhen Hongyutai Technology Co., Ltd. , https://www.redyut.com