MDF has better nail holding power than particle board.
Particleboard is made by breaking natural wood into small particles and pressing them into panels. It is widely used as the main material for cabinets today. MDF, on the other hand, is produced by compressing wood fibers, resulting in a smooth surface. However, it has poor moisture resistance.
In comparison, MDF has lower nail-holding strength than particle board. If screws become loose after being tightened, it can be difficult to fix due to the relatively low structural strength of MDF. As a result, it's rarely used in cabinet manufacturing.
Veneer plywood: convenient and cost-effective.
Multi-layer boards, also known as three-ply or veneer plywood, come in different layers and have various names. In home decoration, the most commonly used type is the finished veneer plywood, which already has a thin layer of real wood veneer attached in the factory. This makes it both affordable and easy to use.
Integrated board: resistant to warping.
This is a new type of solid wood material, typically made from high-quality imported large-diameter logs. The wood is interlocked with finger joints during production. Due to the advanced manufacturing process, this board has superior environmental performance. It emits only 1/8 of the formaldehyde compared to traditional blockboards. Additionally, wood made from American spruce can be directly painted without the need for additional finishing steps, saving time and labor in the process.
Huai 'an Bst Trade Co., LTD , https://www.bstoral.com