Many packaging manufacturers are committed to reducing the weight of the package, and to spend more energy on the appearance of the package, from the consumer's point of view, to produce a container that is both easy to use and generous. Today, a new injection stretch blow molding technology is used in the container production process to produce a handle container that is very convenient to use.
Plastic Technologies believes that its new technological breakthrough for containers will provide users with a great opportunity to reduce the weight of the container by 25%, and let the company pay more attention to the aesthetics of the package. Especially in the general company's pursuit of high-definition efforts.
On November 1st, at the packaging exhibition, PTI's director of customer development and marketing was interviewed and said: "This new PET bottle can bring better market impact to its trademark owners. Our goal is to develop User-friendly packaging. This type of packaged bottle is better than bottles made of mixed materials on the market. It can make it easy for consumers to pour the liquid from multiple containers at the same time."
He added: "At this exhibition, we only introduced some samples of containers. Trademark holders are always looking for more convenient hand-held bottles. They need to investigate their users to obtain useful information. â€
PTI said that they had tried to make DeepGrip bottles in the past. Using injection stretch blow molding, it did bring some benefits compared to the extrusion blow molding process (representative technology with hand-held bottles).
According to PTI, the benefits of injecting stretch blow molding include: May reduce bottle weight by 20%-25%, export volume reaches 1200 per hour, have a smaller device footprint and better drop and resistance Creep performance.
“Those brand owners are usually like controlling the weight of the package, and spending more on improving the appearance of the bottle to provide a way to identify their products. Deep Grip technology is an ideal choice.†PTI Europe The general manager added.
PTI Europe will first promote the Deep Grip containers to the market. They cooperate with the French Sidel Group in Le Havre, which is one of Switzerland's TetraLaval International SA, which operates three major industries.
The Deep Grip container put the initial market goals for clean bottles, daily cleaning containers, containers for milk, edible oils and motor oils, baby bottles and containers for non-carbonated beverages including juices, teas and water.
Puvak said: "In this technology we have been working closely with Procter and Gamble. They both tend to be consumers and want to develop a container that is more convenient for consumers to hold and dump."
The injection stretch blow process adds a handle to the container. This handle can hold more than 25 mm or 1 inch on each side of the container, or less than 0.3 mm or 0.1 inch. Such a large grip range will make It will replace the traditional bottle with a handle.
The bottle and its embedded handle are produced using the same raw material on the Sidel equipment using a two-step process. This kind of bottle first passes through the traditional stretch blow molding process, and then a further injection process on the same device becomes the handle. In addition, injection stretch blow molding allows the blow and transfer of the container to be filled, eliminating the manufacturing process.
According to PTI, precisely, this technology gives brand owners great flexibility in gripping the handles, shapes, and diameters of containers, making them as large as 6 liters or 1.5 gallons and measuring 220 millimeters or 8.6 inches in diameter.
Plastic Technologies believes that its new technological breakthrough for containers will provide users with a great opportunity to reduce the weight of the container by 25%, and let the company pay more attention to the aesthetics of the package. Especially in the general company's pursuit of high-definition efforts.
On November 1st, at the packaging exhibition, PTI's director of customer development and marketing was interviewed and said: "This new PET bottle can bring better market impact to its trademark owners. Our goal is to develop User-friendly packaging. This type of packaged bottle is better than bottles made of mixed materials on the market. It can make it easy for consumers to pour the liquid from multiple containers at the same time."
He added: "At this exhibition, we only introduced some samples of containers. Trademark holders are always looking for more convenient hand-held bottles. They need to investigate their users to obtain useful information. â€
PTI said that they had tried to make DeepGrip bottles in the past. Using injection stretch blow molding, it did bring some benefits compared to the extrusion blow molding process (representative technology with hand-held bottles).
According to PTI, the benefits of injecting stretch blow molding include: May reduce bottle weight by 20%-25%, export volume reaches 1200 per hour, have a smaller device footprint and better drop and resistance Creep performance.
“Those brand owners are usually like controlling the weight of the package, and spending more on improving the appearance of the bottle to provide a way to identify their products. Deep Grip technology is an ideal choice.†PTI Europe The general manager added.
PTI Europe will first promote the Deep Grip containers to the market. They cooperate with the French Sidel Group in Le Havre, which is one of Switzerland's TetraLaval International SA, which operates three major industries.
The Deep Grip container put the initial market goals for clean bottles, daily cleaning containers, containers for milk, edible oils and motor oils, baby bottles and containers for non-carbonated beverages including juices, teas and water.
Puvak said: "In this technology we have been working closely with Procter and Gamble. They both tend to be consumers and want to develop a container that is more convenient for consumers to hold and dump."
The injection stretch blow process adds a handle to the container. This handle can hold more than 25 mm or 1 inch on each side of the container, or less than 0.3 mm or 0.1 inch. Such a large grip range will make It will replace the traditional bottle with a handle.
The bottle and its embedded handle are produced using the same raw material on the Sidel equipment using a two-step process. This kind of bottle first passes through the traditional stretch blow molding process, and then a further injection process on the same device becomes the handle. In addition, injection stretch blow molding allows the blow and transfer of the container to be filled, eliminating the manufacturing process.
According to PTI, precisely, this technology gives brand owners great flexibility in gripping the handles, shapes, and diameters of containers, making them as large as 6 liters or 1.5 gallons and measuring 220 millimeters or 8.6 inches in diameter.
We are China leading Indoor Trampoline Park manufacturer,over 200+ parks installed around the world,we have got CE,ASTM and TUV certifiate,we have dedicated to the research,development,manufacture,sales and service of trampoline park.
1) Trampoline parks around the world
2) Trampoline park plan
3) Liben trampoline park manufacturer
4) Contacat of trampoline park manufacturer
Indoor Trampoline,Trampoline Park Equipment, Kids Trampoline,Indoor Trampoline Park Equipment
Liben Group Corporation , https://www.trampolinearea.com