Automatic Packing Machine Introduction

What is automatic packaging machine
     Automatic packaging machine is mainly used for packaging tablets, capsules, suppositories, capsules and other solid drugs, using the internal heating. It is the most suitable product for small hospitals, outpatients, hospital preparation rooms, and small health products plants.
Fully automatic baler features
     Modular aluminum alloy arch frame design, convenient disassembly and assembly; fully automated design, operation and use more convenient; the maximum size of the bundle is determined by the bow frame, the arch frame can be customized according to the user's needs; motor, reducer, cam, tightening Arm operation; excellent packing tightness, less malfunction, easy maintenance; soft packing movement, excellent durability, perfect packing function; the motor stops immediately after packing and power saving is practical.
Classified by different criteria
     1. By Usage: Waste Paper Balers, Metal Balers, Straw Balers, Cotton Balers, Plastic Balers, etc. 2. By Mechanism: Unmanned Balers, Fully Automatic Horizontal Balers, Fully Automatic Swords -type balers, fully automatic pressurized sword-type balers, fully automatic pressurized balers, portable balers, etc.
Full automatic baler application scope
     Widely used in food, medicine, hardware, chemical, clothing, postal and other industries, apply to carton packaging, paper packaging, parcel letter packaging, medicine packaging, light industry packaging, hardware tools packaging, ceramic packaging, auto parts packaging, daily chemical Packing of goods, packing of sports and sports goods, equipment packing and other automatic packing of various sizes of goods.
The working principle of the baler
The packaged object is basically in the middle of the baler. First, the right top body is raised and the front end of the strap is pressed. The strap is tightened and tied on the object. Then the left top body is raised and the lower strap is pressed in place. The heating piece extends into the middle of the two straps. The top knife rises, cuts the strap, and finally places the next strap to the end to complete a work cycle. A baler is a machine that wraps a product or package around a strap, tightens it, and fuses both ends with heat or a material such as a buckle. The function of the baler is to enable the plastic tape to cling tightly to the surface of the bundled package, ensuring that the package is not scattered due to loose binding during transportation and storage, and that the bundle should be neatly and beautifully bundled.
Fully automatic baler workflow
     The strap is delivered to the place → The strapping signal is received → The brake is released, the main motor starts (1) → The right top knife rises, and the top right slides at the slide (2) → The “T” guide moves backwards (3) → The proximity switch senses Withdraw the probe (4) → The main motor stops, the brake pulls (5) → The baler withdraws the motor rotation, withdraws the belt for 0.35 seconds (6) → The belt is tightened on the object (7) → The main motor is started twice , Braking (8) → Secondary pull straps, tightening straps (9) → Ascending of the left top body, pressing the lower strap (10) → Heater sticking into the middle of the two straps (11) → Middle cutter Rising, cut off the tape (12) → drop in the top knife (13) → the top knife rises again, so that the two tapes are firmly bonded (14) → the top knife is lowered, the top knife is lowered at the same time (15) → the heater chip is reset ( 16)→Slideback (17)→T-shaped guide reset (18)→Proximity switch sensing to tape feed probe (19)→Feed belt motor activation, belt feeding (20)→Loose swing lever reset (21) → Take the strap in place, take the head to the “T” type guide (22) → proximity switch senses to dual probes (23) → main motor stops, brakes close (24) → the baler completes a work cycle.
Automatic baler http://
Semi-automatic baler http://
Sealing machine http://