[ Chinese wardrobe net ] The furniture in the home is easy to accumulate deposit dust after buying it, so we should always clean the furniture. In the process of cleaning the furniture, what are we mainly paying attention to?
First: the rag is clean
When cleaning and maintaining furniture, be sure to make sure the rags are clean. After cleaning or wiping off the dust, be sure to turn over or replace it with a clean cloth. Don't be lazy and repeatedly use the dirty side, this will only make the dirt rub repeatedly on the furniture surface, but will damage the bright surface of the furniture.
Second: choose the right care agent
In order to maintain the original brightness of the furniture, there are currently two kinds of furniture care products: furniture care spray wax and cleaning and maintenance agent. The former is mainly for furniture made of wood, polyester, paint, fireproof rubber sheet, etc., and has two different fresh fragrances of jasmine and lemon. The latter is suitable for all kinds of furniture such as wood, glass, synthetic wood or melamine board, especially suitable for mixed materials. Therefore, if you can use a skin care product that combines cleansing and care, you can save a lot of valuable time. Before using the wax and cleaning and maintenance agent, it is best to shake it first, then hold the spray can directly at a 45 degree angle, so that the liquid component in the tank can be completely released without losing pressure. Then gently spray the dry rag at a distance of about 15 cm, so that you can wipe the furniture again, which can be very good for cleaning and maintenance. In addition, after using the rag, remember to wash and dry. For furniture with fabric materials, such as fabric sofas and leisure cushions, you can use the cleaning and cleaning agent for cleaning carpets. When using, first use a vacuum cleaner to remove dust, then spray a small amount of carpet cleaner on a damp cloth.
Packing Tape Information
Packaging tape is made from varied materials using many different adhesives to adhere to containers. The most used packaging tapes are made from polypropylene with an acrylic adhesive.
Packaging Tape is an important part of any packaging operation. Companies using boxes, envelopes, or any other containers for packaging normally use tape for sealing. Tapes specifically made for packaging come in a variety of lengths, colors, and widths. They also vary in materials and adhesives they are made from.
Below is a brief explanation of the types of tapes we offer and what they are recommended to be used for.
Holt Melt Tape
Color Tape
Masking Tape
Low Noise Tape
Packing tape terms
Here are a few packing tape terms about tape, which are important for resolving tape and using tape.
Abrasion Resistance – The ability of a tape to withstand scuffing, scraping, and rubbing against other surfaces.
Elongation – The distance a tape can stretch lengthways without breaking.
Tensile Strength – The force often measured in pounds to break a piece of tape by pulling each side in opposite directions.
High-Speed Unwind – The practice of dispensing tape at speeds in excess of 15 meters per minute.
Hot Melt Adhesive – A pressure sensitive adhesive applied in liquid form.
Shock Resistance – The ability of a tape to resist sudden shocks throughout transport. Shocks can be falls, crushing, pulls, and more.
Peel Adhesion – The force required to remove a tape from the surface it has been applied.
Backing Material – The backing material is the material the chosen adhesive is applied to. A variety of backing materials are used in tape manufacturing including films, paper, and foam.
Packing Tape
Seal Tape,Cello Tape,Gummed Tape,Self Adhesive Tape
Shenzhen Chengxing Packing & Material Co.,Ltd Shenzhen caomu new material products Co., Ltd , https://www.cxpack.com