See the national standard selection for children's furniture
Interpretation of the mandatory requirements for structural safety in the new national standard for children's furniture (children's furniture decoration renderings) from the perspective of collision, extrusion and sealing
Expert guidance: Sun Shudong, Director of Furniture Inspection Laboratory, National Furniture and Indoor Environmental Quality Supervision and Inspection Center
Edge and tip: smooth processing
The product should not be dangerous and sharp edges and dangerous sharp tips. The edges and edges should be rounded or chamfered. The contactable dangerous external angle of the product below the ground level of 1600 mm should be rounded, and the rounding radius should be no less than 10 mm, or the inverted arc length should be no less than 15 mm.
Standard interpretation: pay attention to the edges and the tip, such as tables, chairs, cabinets, drawers or beds, etc., this part is treated with rounded corners or inner corners.
Folding mechanism: prevent extrusion
Except for doors, covers, push-pull parts and their hardware (hardware decoration effect diagram), the product should not produce dangerous extrusion and shear points under normal use load. If the product has a folding mechanism or bracket, there should be a safety stop or locking device to prevent accidental movement or folding.
Standard interpretation: folding chairs, folding table products, need to be fixed after folding, to prevent sudden damage to children.
Overhang: protect
The product should not have dangerous protrusions. If dangerous protrusions are present, they are protected in a suitable manner.
Standard interpretation: The protrusions of furniture such as handles, bolts and other parts need to be protected to avoid scratching or bumping children.
Flip door, flap: not easy to open, close
The closing force of the flap or flap in the product should be greater than or equal to 8 Newtons.
Standard interpretation: Ensure that the closing force of the door panel is larger and will not be easily opened or closed to prevent children from being injured or pinched.
Holes and gaps: avoid getting stuck
Holes and gaps with a depth of more than 10 mm on the furniture shall have a diameter or clearance of less than 6 mm or more than 12 mm; the gap between movable parts of the product to be contacted shall be less than 5 mm or greater than or equal to 12 mm.
Standard Interpretation: Avoid the danger of children not getting their fingers out of the hole or getting stuck in the drawer.
Enclosed furniture: guaranteed ventilation
When the product has a non-breathable confined space, an effective ventilation opening shall be provided; the furniture shall be placed at any position on the floor and the vents shall remain unobstructed when resting at two corners of the corner of the room that intersect at 90 degrees. The vents can be fitted with a mesh or similar component that is breathable. Covers, doors and similar devices should not be equipped with automatic locking devices.
Standard interpretation: Furniture with enclosed space must have vents or doors, covers, etc. There must be no locking device to ensure that children can open from the inside.
Facial Cleanser
Key ingredients: Hamamelis extract, betaine, Carbomer, etc.
Capacity: 120g
t It is suitable for daily skin care, with light texture, forming moisturizing film on the skin surface, providing moisture for the skin.
Facial Cleanser
Face Cleaner,Facial Cleanser,Natural Face Cleanser,Oil Control Face Wash
Shenzhen Sipimo Technology Co., Ltd , https://www.sipimotech.com